Search for: All records

The PEG addition into aqueous electrolytes has an opposite effect on an Fe metal anode compared to a Zn metal anode. 

Abstract The narrow electrochemical stability window of water poses a challenge to the development of aqueous electrolytes. In contrast to non‐aqueous electrolytes, the products of water electrolysis do not contribute to the formation of a passivation layer on electrodes. As a result, aqueous electrolytes require the reactions of additional components, such as additives and co‐solvents, to facilitate the formation of the desired solid electrolyte interphase (SEI) on the anode and cathode electrolyte interphase (CEI) on the cathode. This review highlights the fundamental principles and recent advancements in generating electrolyte interphases in aqueous batteries. 

Amidst the rapid expansion of the electric vehicle industry, the need for alternative battery technologies that balance economic viability with sustainability has never been more critical. Here, we report that common lithium salts of Li2CO3 and Li2SO4 are transformed into cathode active mass in Li-ion batteries by ball milling to form a composite with Cu2S. The optimal composite cathode comprising Li2CO3, Li2SO4, and Cu2S, with a practical active mass loading of 12.5-13.0 mg/cm2, demonstrates a reversible capacity of 247 mAh/g based on the total mass of Cu2S and the lithium salts, a specific energy of 716 Wh/kg, and a stable cycle life. This cathode chemistry rivals layered oxide cathodes of Li-ion batteries in energy density but at substantially reduced cost and ecological footprint. Mechanistic investigations reveal that in the composite Li2CO3 serves as the primary active mass, Li2SO4 enhances kinetic properties and reversibility, and Cu2S stabilizes the resulting anionic radicals for reversibility as a binding agent. Our findings pave the way for directly using precursor lithium salts as cathodes for Li-ion batteries to meet the ever-increasing market demands sustainably. 

In the Mn₃O₄electrode, chloride ions are reversibly converted into atomic chlorine species. Trapped Zn²⁺cations aid in stabilizing these chlorine atoms in polychloride species. 

Abstract Iron is a promising candidate for a cost‐effective anode for large‐scale energy storage systems due to its natural abundance and well‐established mass production. Recently, Fe‐ion batteries (FeIBs) that use ferrous ions as the charge carrier have emerged as a potential storage solution. The electrolytes in FeIBs are necessarily acidic to render the ferrous ions more anodically stable, allowing a wide operation voltage window. However, the iron anode suffers severe hydrogen evolution reaction with a low Coulombic efficiency (CE) in an acidic environment, shortening the battery cycle life. Herein, a hybrid aqueous electrolyte that forms a solid‐electrolyte interphase (SEI) layer on the Fe anode surface is introduced. The electrolyte mainly comprises FeCl₂and ZnCl₂as cosalts, where the Zn‐Cl anionic complex species of the concentrated ZnCl₂allows dimethyl carbonate (DMC) to be miscible with the aqueous ferrous electrolyte. SEI derived from DMC's decomposition passivates the iron surface, which leads to an average CE of 98.3% and much‐improved cycling stability. This advancement shows the promise of efficient and durable FeIBs. 

Manganese dioxide (MnO 2 ) with a conversion mechanism is regarded as a promising anode material for lithium-ion batteries (LIBs) owing to its high theoretical capacity (∼1223 mA h g −1 ) and environmental benignity as well as low cost. However, it suffers from insufficient rate capability and poor cyclic stability. To circumvent this obstacle, semiconducting polypyrrole coated-δ-MnO 2 nanosheet arrays on nickel foam (denoted as MnO 2 @PPy/NF) are prepared via hydrothermal growth of MnO 2 followed by the electrodeposition of PPy on the anode in LIBs. The electrode with ∼50 nm thick PPy coating exhibits an outstanding overall electrochemical performance. Specifically, a high rate capability is obtained with ∼430 mA h g −1 of discharge capacity at a high current density of 2.67 A g −1 and more than 95% capacity is retained after over 120 cycles at a current rate of 0.86 A g −1 . These high electrochemical performances are attributed to the special structure which shortens the ion diffusion pathway, accelerates charge transfer, and alleviates volume change in the charging/discharging process, suggesting a promising route for designing a conversion-type anode material for LIBs. 

Abstract The electrochemical stability window of water is known to vary with the type and concentration of dissolved salts. However, the underlying influence of ions on the thermodynamic stability of aqueous solutions has not been fully understood. Here, we investigated the electrolytic behaviors of aqueous electrolytes as a function of different ions. Our findings indicate that ions with high ionic potentials, i.e., charge density, promote the formation of their respective hydration structures, enhancing electrolytic reactions via an inductive effect, particularly for small cations. Conversely, ions with lower ionic potentials increase the proportion of free water molecules—those not engaged in hydration shells or hydrogen‐bonding networks—leading to greater electrolytic stability. Furthermore, we observe that the chemical environment created by bulky ions with lower ionic potentials impedes electrolytic reactions by frustrating the solvation of protons and hydroxide ions, the products of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively. We found that the solvation of protons plays a more substantial role than that of hydroxide, which explains a greater shift for OER than for HER, a puzzle that cannot be rationalized by the notion of varying O−H bond strengths of water. These insights will help the design of aqueous systems.